Plumber’s tips on Installing an outdoor faucet

Exterior faucets

Having a faucet outdoors is a must especially for those who clean their own cars, and have lawns or yards that need to be watered. (Photo Credits)

An exterior faucet is a must in most households. The problem though is not all homes have been installed with one, or some may need more than one.

The website Family Handyman came out with an easy to understand guide on installing an outdoor faucet. A/C and HVAC  

"Copper pipe is best for the exposed plumbing at the house, but PEX tubing is best for underground. It's a lot cheaper than copper and it's easier to install than CPVC plastic. With PEX, you can make a continuous run from your house and make turns without installing a single fitting. Plus, PEX tolerates mild freezing better than either CPVC or copper (in case you're late blowing out the line). However, you'll have to invest in a 3/4-in. PEX crimping tool. If you don't want to shell out the cash, use CPVC."

Check out the rest of the guide here.

Installation Guide

The website SF Gate also came out with its own guide in installing an exterior faucet. Plumbing Association of San Diego 

"Many homes have an absolute minimum of exterior plumbing, with perhaps only one centrally located faucet. That's not necessarily a bad thing in areas with hard winters. In milder climates, it translates into an unnecessary struggle with long hoses and leaky diverters to water your lawn or garden. The simplest solution is to install another exterior wall faucet. For a bit more money, you can get a frost-proof model that you won't have to worry about should a rare cold snap hit."

Plumber's response to a slow drain

Take a look at the tutorial here.

Related Plumbing Repair and Installation Services

• DiamondAce Plumber Review San Diego Click Here  
• BDP Air Conditioning Contractor San Diego More Info
• San Diego Drain Cleaning Team Check Website             
• Plumber Repair Service Carlsbad 24/7 Service             
• Del Mar Plumber Company Free Estimate       
• DiamondAce Plumber Now Lemon Grove Click Here  

If unsure as to how to install an outdoor faucet, it is still best to contract the services of a licensed expert plumbing contractor.

Service Ratings Website Angie's List offered some advice on how to save costs when hiring a plumber.

 Plumber's Response to murky water

"The time and effort it takes to install the exterior faucet depends on whether you have a crawlspace or basement. Some plumbers work faster in crawlspaces, others in unfinished basements. Either way, if they have easy access to the water line they'll be able to work faster, which can mean a lower price. The job becomes more complicated if you have a finished basement, because the plumber has to work around more obstacles to access the water line. The plumber may have to cut through the ceiling or walls, so you might need to hire a separate contractor to patch the holes."

Check out the rest of the advice here.

Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117

(888) 231-1086

Diamond Ace Contractors Plumber Contractor San Diego

Plumber's tips on lowering excessive water pressure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The post Plumber's tips on Installing an outdoor faucet appeared first on Blue Diamond Plumbing.

Plumber’s tips on Installing an outdoor faucet

Exterior faucets

Having a faucet outdoors is a must especially for those who clean their own cars, and have lawns or yards that need to be watered. (Photo Credits)

An exterior faucet is a must in most households. The problem though is not all homes have been installed with one, or some may need more than one.

The website Family Handyman came out with an easy to understand guide on installing an outdoor faucet. A/C and HVAC  

"Copper pipe is best for the exposed plumbing at the house, but PEX tubing is best for underground. It's a lot cheaper than copper and it's easier to install than CPVC plastic. With PEX, you can make a continuous run from your house and make turns without installing a single fitting. Plus, PEX tolerates mild freezing better than either CPVC or copper (in case you're late blowing out the line). However, you'll have to invest in a 3/4-in. PEX crimping tool. If you don't want to shell out the cash, use CPVC."

Check out the rest of the guide here.

Installation Guide

The website SF Gate also came out with its own guide in installing an exterior faucet. Plumbing Association of San Diego 

"Many homes have an absolute minimum of exterior plumbing, with perhaps only one centrally located faucet. That's not necessarily a bad thing in areas with hard winters. In milder climates, it translates into an unnecessary struggle with long hoses and leaky diverters to water your lawn or garden. The simplest solution is to install another exterior wall faucet. For a bit more money, you can get a frost-proof model that you won't have to worry about should a rare cold snap hit."

Plumber's response to a slow drain

Take a look at the tutorial here.

Related Plumbing Repair and Installation Services

• DiamondAce Plumber Review San Diego Click Here  
• BDP Air Conditioning Contractor San Diego More Info
• San Diego Drain Cleaning Team Check Website             
• Plumber Repair Service Carlsbad 24/7 Service             
• Del Mar Plumber Company Free Estimate       
• DiamondAce Plumber Now Lemon Grove Click Here  

If unsure as to how to install an outdoor faucet, it is still best to contract the services of a licensed expert plumbing contractor.

Service Ratings Website Angie's List offered some advice on how to save costs when hiring a plumber.

 Plumber's Response to murky water

"The time and effort it takes to install the exterior faucet depends on whether you have a crawlspace or basement. Some plumbers work faster in crawlspaces, others in unfinished basements. Either way, if they have easy access to the water line they'll be able to work faster, which can mean a lower price. The job becomes more complicated if you have a finished basement, because the plumber has to work around more obstacles to access the water line. The plumber may have to cut through the ceiling or walls, so you might need to hire a separate contractor to patch the holes."

Check out the rest of the advice here.

Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117

(888) 231-1086

Diamond Ace Contractors Plumber Contractor San Diego

Plumber's tips on lowering excessive water pressure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The post Plumber's tips on Installing an outdoor faucet appeared first on Blue Diamond Plumbing.

Plumber’s tips on lowering excessive water pressure

When water pressure is too high

Excessive water pressure can be counterproductive and expensive in terms of utility bills. (Photo Credits) 

Too much water pressure can be an annoyance in any household. Apart from being a hassle it could also increase water usage. It is important that this matter be addressed as quickly as possible to lessen the hassle it brings. A/C And HVAC 

The website DIY Plumbing Advice explained the reason for high water pressure.

"The most common source of excessive water pressure is the municipal water supplier. The water company sets the pressure to meet their own needs, such as delivering water to fire hydrants, high elevation buildings (or tall ones), and other reasons. This water pressure is often well over 100 psi, and too often over 150 psi. However, the maximum recommended pressure for a residence is 80 psi."

Plumber Hacks homeowners can use when issues arise

Read the rest of the article here.

Water Pressure Level

Service Ratings Website Angie's List also came up with its own explanation n the consequences of high water pressure, and what can be done about it. Plumbing Association of San Diego  

"If you have consistent water pressure in your home that exceeds 80 psi, you should have a water pressure regulator installed on a water line coming into the home. Some people call this a pressure regulating valve, or PRV. If your home was built after 2002, a PRV may already be installed, since that was the year it became required on all new homes. However, a typical PRV's lifespan is about 7 to 12 years. Usually this valve is located near your shut-off valve."

Check out the rest of the article here.

Related Plumbing Repair and Installation Services

• San Diego HVAC Contractor More Info              
• HVAC Lakeside Click Website             
• HVAC Escondido Free Estimate     
• HVAC Chula Vista Emergency HVAC
• H.V.A.C El Cajon Get Free Quote 
• AC Repair Oceanside 24/7 Repair       

SF Gate also came up with a tutorial guide on how to reduce water pressure level.

"Locate an outdoor or laundry faucet with a threaded spout and screw on a water pressure meter. You can buy the meter at a hardware store or rent one from a rental outlet. Turn on the water, note the pressure and leave the water turned on. If there's already a meter installed on the water line after the pressure-reducing valve, you can skip this step."

Plumbing Details to inspect before buying an older home

Read the other steps here.

Excessive water pressure can damage plumbing fixtures at home. The safest way to address this is by calling a plumbing contractor.

Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117
(888) 231-1086

Diamond Ace Contractors Plumber in San Diego CA

HVAC Experts on installing an exhaust fan

 

The post Plumber's tips on lowering excessive water pressure appeared first on Blue Diamond Plumbing.

Plumber’s tips on lowering excessive water pressure

When water pressure is too high

Excessive water pressure can be counterproductive and expensive in terms of utility bills. (Photo Credits) 

Too much water pressure can be an annoyance in any household. Apart from being a hassle it could also increase water usage. It is important that this matter be addressed as quickly as possible to lessen the hassle it brings. A/C And HVAC 

The website DIY Plumbing Advice explained the reason for high water pressure.

"The most common source of excessive water pressure is the municipal water supplier. The water company sets the pressure to meet their own needs, such as delivering water to fire hydrants, high elevation buildings (or tall ones), and other reasons. This water pressure is often well over 100 psi, and too often over 150 psi. However, the maximum recommended pressure for a residence is 80 psi."

Plumber Hacks homeowners can use when issues arise

Read the rest of the article here.

Water Pressure Level

Service Ratings Website Angie's List also came up with its own explanation n the consequences of high water pressure, and what can be done about it. Plumbing Association of San Diego  

"If you have consistent water pressure in your home that exceeds 80 psi, you should have a water pressure regulator installed on a water line coming into the home. Some people call this a pressure regulating valve, or PRV. If your home was built after 2002, a PRV may already be installed, since that was the year it became required on all new homes. However, a typical PRV's lifespan is about 7 to 12 years. Usually this valve is located near your shut-off valve."

Check out the rest of the article here.

Related Plumbing Repair and Installation Services

• San Diego HVAC Contractor More Info              
• HVAC Lakeside Click Website             
• HVAC Escondido Free Estimate     
• HVAC Chula Vista Emergency HVAC
• H.V.A.C El Cajon Get Free Quote 
• AC Repair Oceanside 24/7 Repair       

SF Gate also came up with a tutorial guide on how to reduce water pressure level.

"Locate an outdoor or laundry faucet with a threaded spout and screw on a water pressure meter. You can buy the meter at a hardware store or rent one from a rental outlet. Turn on the water, note the pressure and leave the water turned on. If there's already a meter installed on the water line after the pressure-reducing valve, you can skip this step."

Plumbing Details to inspect before buying an older home

Read the other steps here.

Excessive water pressure can damage plumbing fixtures at home. The safest way to address this is by calling a plumbing contractor.

Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117
(888) 231-1086

Diamond Ace Contractors Plumber in San Diego CA

HVAC Experts on installing an exhaust fan

 

The post Plumber's tips on lowering excessive water pressure appeared first on Blue Diamond Plumbing.

HVAC Experts on installing an exhaust fan

Exhaust Fan Installation in an older home

Exhaust fans are important in maintaining a good ventilation inside the home. (Photo Credits)

To ensure appropriate ventilation inside the home, bathrooms and other moist areas should have an exhaust fan. And while most current homes have one that are already installed, some older houses do not.

If a homeowner is thinking of installing an exhaust fan and he is unsure about how to do it, then his safest bet is to call up an HVAC professional to help him do the job.

For those who may want to give it a try, some books, as well as the Internet is a good source of step-by-step instructions to help with this type of home project.

The website This Old House has an extensive tutorial on this. Plumbing Association of San Diego        

"Bath vent fans are rated by how many cubic feet of air they can move in one minute, known as the CFM rating. To determine which size fan to buy for your bath, multiply the room's square footage by 1.1. For example, a 100-square-foot bath would require a 110 CFM-rated fan. Fan' also have a sound rating, measured in sones. (A modern refrigerator operates at about one sone.) Vent fans range from as low as 0.5 sone up to about 6.0 sones. You'll find both the CFM and sone ratings printed on the vent fan's box."

Common HVAC Problems in Older Homes

Check out the rest of the material here.

Old House Vent Fan Installation

House Logic also came up with a comprehensive explanation on how to install bathroom exhaust fans. A/C And HVAC   

"Bathroom fan installation isn't brain surgery — collect air here; exhaust air out there. But it's not for beginners either, because the project includes removing drywall, perhaps drilling through joists, certainly busting through an exterior wall or roof. We suggest hiring an HVAC pro…"

Read the whole tutorial guide here.

Related Plumbing and HVAC Related Services:

• Commercial H.V.A.C Contractor Website Info  
• HVAC Contractor Lakeside Click Here
• Plumber Service Escondido 24/7 Service
• BDP HVAC Chula Vista Free Estimate
• H.V.A.C El Cajon Free Quotation  
• BDP HVAC Oceanside Click Here         

The website Today's Homeowner meanwhile came up with tips on installing bathroom vents.

"As long as the wiring for your bathroom vent fans is attached to a Ground Fault Circuit Interrupter (GFCI) and the fan is rated for a shower area, the best place to locate your vent fan is on the ceiling in or near the shower where it will do the most good. Vent fans that include a heater, however, should not be installed over a shower."

What to do when the HVAC Unit leaks

Read the rest of the tips here.

https://www.todayshomeowner.com/tips-on-where-and-how-to-install-a-bathroom-vent-fan/

Installing a bathroom fan can greatly help in minimizing mold and mildew problems at home.

 Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117

(888) 231-1086

Diamond Ace Contractors Air Conditioner Servicing

Plumber's Response to Murky Faucet Water

 

The post HVAC Experts on installing an exhaust fan appeared first on Blue Diamond Plumbing.

HVAC Experts on installing an exhaust fan

Exhaust Fan Installation in an older home

Exhaust fans are important in maintaining a good ventilation inside the home. (Photo Credits)

To ensure appropriate ventilation inside the home, bathrooms and other moist areas should have an exhaust fan. And while most current homes have one that are already installed, some older houses do not.

If a homeowner is thinking of installing an exhaust fan and he is unsure about how to do it, then his safest bet is to call up an HVAC professional to help him do the job.

For those who may want to give it a try, some books, as well as the Internet is a good source of step-by-step instructions to help with this type of home project.

The website This Old House has an extensive tutorial on this. Plumbing Association of San Diego        

"Bath vent fans are rated by how many cubic feet of air they can move in one minute, known as the CFM rating. To determine which size fan to buy for your bath, multiply the room's square footage by 1.1. For example, a 100-square-foot bath would require a 110 CFM-rated fan. Fan' also have a sound rating, measured in sones. (A modern refrigerator operates at about one sone.) Vent fans range from as low as 0.5 sone up to about 6.0 sones. You'll find both the CFM and sone ratings printed on the vent fan's box."

Common HVAC Problems in Older Homes

Check out the rest of the material here.

Old House Vent Fan Installation

House Logic also came up with a comprehensive explanation on how to install bathroom exhaust fans. A/C And HVAC   

"Bathroom fan installation isn't brain surgery — collect air here; exhaust air out there. But it's not for beginners either, because the project includes removing drywall, perhaps drilling through joists, certainly busting through an exterior wall or roof. We suggest hiring an HVAC pro…"

Read the whole tutorial guide here.

Related Plumbing and HVAC Related Services:

• Commercial H.V.A.C Contractor Website Info  
• HVAC Contractor Lakeside Click Here
• Plumber Service Escondido 24/7 Service
• BDP HVAC Chula Vista Free Estimate
• H.V.A.C El Cajon Free Quotation  
• BDP HVAC Oceanside Click Here         

The website Today's Homeowner meanwhile came up with tips on installing bathroom vents.

"As long as the wiring for your bathroom vent fans is attached to a Ground Fault Circuit Interrupter (GFCI) and the fan is rated for a shower area, the best place to locate your vent fan is on the ceiling in or near the shower where it will do the most good. Vent fans that include a heater, however, should not be installed over a shower."

What to do when the HVAC Unit leaks

Read the rest of the tips here.

https://www.todayshomeowner.com/tips-on-where-and-how-to-install-a-bathroom-vent-fan/

Installing a bathroom fan can greatly help in minimizing mold and mildew problems at home.

 Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117

(888) 231-1086

Diamond Ace Contractors Air Conditioner Servicing

Plumber's Response to Murky Faucet Water

 

The post HVAC Experts on installing an exhaust fan appeared first on Blue Diamond Plumbing.

Plumber’s Response to Murky Faucet Water

What to do when faucets spew dirty water

Dirty Water Problem. (Photo Credits)

When murky or brownish water suddenly comes out of the faucet, homeowners are usually left weirded out and trying to find out what could be done about it.

It is not only unsightly, it is also very much unsanitary and could even cause illnesses to some extent.

Detect a leak like a professional Plumber

In its official blog site, the Environmental Working Group came up with a comprehensive explanation on why tap water color would suddenly change.

One of the reasons it cited is organic material settling in the plumbing system. Plumbing Association of San Diego       

"Dirt and other naturally occurring sediments settle at the bottom of water supply lines. If something causes the water passing through the pipes to speed up – such as a water main break, high service demand or even firefighting – the faster flow can stir up the sediment and cause your water to appear yellow or brown."

Plumbing Details to inspect before buying an older home

Read the whole explanation here.

Rust from the pipes

Bobvila.com also explained why brown water may be coming out of the tap. Rust from the iron pipes could be causing it, a water main break, or from the home water heater. A/C and HVAC 

"The most likely culprit is rust leeching from an aging galvanized iron pipe. If you mainly notice the discoloration first thing in the morning—or after being away from your home for a while—chances are it's a supply line. That's especially true if only one faucet in your home is spewing the brown stuff. Before you replace any pipes, though, call the local water department to see if anyone else in your neighborhood has reported the same issue. If so, the discoloration may be due to a water-main break (or hydrants being flushed). In either of those cases, you could expect the discoloration to clear in an hour or so."

Read the whole material here.

Related Plumbing and HVAC Repair and Installation Services

• San Diego, California Plumber Near Me 24/7 Service
• Air Conditioning San Diego, California Free Estimate
• Sink and Drain San Diego, CA Click Here
• Rancho Bernardo Plumber DiamondAce Contractors More Info    
• City of El Cajon Plumber Free Quote
• DiamondAce Plumber Now Del Mar

Treehugger.com also came up with an explanation on why tap water would suddenly turn brown.

"Your drinking water may be brown because it has too much iron in it. Iron is a common, naturally occurring metal in soil, and as a result, is normally present in your drinking water. Under normal conditions, drinking water provides about 5% of the iron that you are supposed to drink or eat each day. You need iron to survive, as iron is a key part of red blood cells and is used to trap oxygen and carry it from your lungs to other parts of your body."

Check out the whole explanation here.

Murky water can be annoying, and can either be harmless, or plain dirty. To find out why this happens exactly, seek the services of a professional plumbing contractor.

Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117
(888) 231-1086

Diamond Ace Contractors Plumber San Diego California

https://www.bluediamondplumbing.net/unpleasant-hvac-odor/

The post Plumber's Response to Murky Faucet Water appeared first on Blue Diamond Plumbing.

Plumber’s Response to Murky Faucet Water

What to do when faucets spew dirty water

Dirty Water Problem. (Photo Credits)

When murky or brownish water suddenly comes out of the faucet, homeowners are usually left weirded out and trying to find out what could be done about it.

It is not only unsightly, it is also very much unsanitary and could even cause illnesses to some extent.

Detect a leak like a professional Plumber

In its official blog site, the Environmental Working Group came up with a comprehensive explanation on why tap water color would suddenly change.

One of the reasons it cited is organic material settling in the plumbing system. Plumbing Association of San Diego       

"Dirt and other naturally occurring sediments settle at the bottom of water supply lines. If something causes the water passing through the pipes to speed up – such as a water main break, high service demand or even firefighting – the faster flow can stir up the sediment and cause your water to appear yellow or brown."

Plumbing Details to inspect before buying an older home

Read the whole explanation here.

Rust from the pipes

Bobvila.com also explained why brown water may be coming out of the tap. Rust from the iron pipes could be causing it, a water main break, or from the home water heater. A/C and HVAC 

"The most likely culprit is rust leeching from an aging galvanized iron pipe. If you mainly notice the discoloration first thing in the morning—or after being away from your home for a while—chances are it's a supply line. That's especially true if only one faucet in your home is spewing the brown stuff. Before you replace any pipes, though, call the local water department to see if anyone else in your neighborhood has reported the same issue. If so, the discoloration may be due to a water-main break (or hydrants being flushed). In either of those cases, you could expect the discoloration to clear in an hour or so."

Read the whole material here.

Related Plumbing and HVAC Repair and Installation Services

• San Diego, California Plumber Near Me 24/7 Service
• Air Conditioning San Diego, California Free Estimate
• Sink and Drain San Diego, CA Click Here
• Rancho Bernardo Plumber DiamondAce Contractors More Info    
• City of El Cajon Plumber Free Quote
• DiamondAce Plumber Now Del Mar

Treehugger.com also came up with an explanation on why tap water would suddenly turn brown.

"Your drinking water may be brown because it has too much iron in it. Iron is a common, naturally occurring metal in soil, and as a result, is normally present in your drinking water. Under normal conditions, drinking water provides about 5% of the iron that you are supposed to drink or eat each day. You need iron to survive, as iron is a key part of red blood cells and is used to trap oxygen and carry it from your lungs to other parts of your body."

Check out the whole explanation here.

Murky water can be annoying, and can either be harmless, or plain dirty. To find out why this happens exactly, seek the services of a professional plumbing contractor.

Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117
(888) 231-1086

Diamond Ace Contractors Plumber San Diego California

https://www.bluediamondplumbing.net/unpleasant-hvac-odor/

The post Plumber's Response to Murky Faucet Water appeared first on Blue Diamond Plumbing.